|
|
|
|
|
|
|
|
Hanna Instruments PRI500 Primo TDS Tester
- Customers who want to ensure the purity of the water produced by their RO water filtration system will enjoy the ease-of-use afforded them by the Primo TDS Tester.
- This microprocessor-powered instrument provides Total Dissolved Solids readings that are accurate enough to meet the exacting standards of water quality professionals, and its big LCD screen, automatic temperature compensation and single-button functionality make obtaining and reading the results a snap.
- It also powers down automatically when it goes unused for five minutes, and includes batteries and instructions.
- 7.1” x 2” x 1” unit measures TDS from 0 to 1999 ppm with 0.0 to 60.0oC resolution; accuracy ±2% F.S.; ±0.5oC.
- Operating and routine maintenance has never been easier.
- Primo TDS uses a single button at the top of the meter.
- Press it once and the meter is powered and ready for use.
- Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself!
- Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes of inactivity.
Specification
- Range 0 to 1999 ppm (mg/L)
- Resolution 1 ppm (mg/L)
- Accuracy ±2% F.S.
- Calibration Solution HI 70032P
- Calibration automatic, at 1382 ppm
- Temperature Compensation Automatic, 0 to 60°C (32 to 140°F), ß=2%/°C
- Battery Type / Life 2 x 1.5V / approx. 200 hours; auto-off after 5 minutes of non-use
- Environment 0 to 50°C (32 to 122°F); RH max 95%
- Dimensions: 180 x 50 x 25 mm (7.1 x 2.0 x 1.0")
- Weight 50 g (1.8 oz.)
| 10253 Hanna Instruments PRI500 Primo TDS Tester |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
